Division 05 of 06
Equipment Spare Parts
- Lines carried
- 7 listed
- Regions served
- 6 corridors
- Documentation
- 8 document types
- Enquiries answered
- Within one business day
Licensed activity · Heavy Equipment & Machinery Spare Parts Trading
Overview
We supply consumable and repair parts for earthmoving, material handling, crushing and screening, drilling and power generation equipment: undercarriage, ground engaging tools, engine and powertrain components, hydraulic cylinders, pumps, motors and valves, filters and scheduled service kits, bearings, slew rings and electrical components. We also handle complete used and surplus units. Parts are offered in three clearly separated categories — genuine OEM in the manufacturer's packaging, OES parts made by the original component supplier under its own brand, and quality aftermarket parts built to interchangeable dimensions and materials — and every quotation states which category each line is.
Ordering is by identification, not description. We work from the machine model and variant, the serial or product identification number, the engine serial and arrangement number and the OEM part number, and we ask for photographs of the machine nameplate and of any casting or forging numbers on the failed part before quoting. Where a line is offered as aftermarket, the quotation states the material specification, hardness or pressure rating being matched and the warranty term. References to equipment makes, models and part numbers identify fitment only and imply no affiliation with, endorsement by, or authorised-dealer relationship with any manufacturer.
Small and urgent items move by air courier or air freight; volume orders and complete units move in containers, or as breakbulk and roll-on/roll-off for machines that cannot be dismantled. Packing is engineered for weight and shock: steel-banded crates on skids for cylinders and track chains, cradles for slew rings, and VCI wrapping with desiccant for machined and unpainted surfaces. Dangerous goods inside a parts order — batteries, aerosols, paints, adhesives, oils and greases — are separated, declared and packed to IMDG or IATA rules rather than mixed into a general consignment.
Typical applications
- Scheduled maintenance and planned component change-out on fleets working to hour-based intervals
- Breakdown support where a machine is down and lead time governs the decision
- Rebuild and overhaul programmes for engines, final drives and hydraulic circuits
- Undercarriage and GET replacement on abrasive sites — quarrying, mining and demolition
- Consignment and min-max stock for site workshops and rental fleets
- Fleet expansion through inspected used and surplus units where new-machine lead times are long
Regions served
- United Arab Emirates and the wider GCC
- East and Central Africa
- West Africa
- South and South-East Asia
- CIS and the Caucasus
- Eastern Mediterranean
Lines carried
Grades, analyses and packaging
Indicative specifications, shown so a procurement team can judge the fit before making contact. Binding figures and tolerances are set in the offer.
01
Undercarriage Components
Track chains, shoes, sprockets, idlers and rollers for tracked machines, quoted by machine class and by link pitch, bushing diameter and shoe width.
Packaging
- Steel-banded on timber skids, centre of gravity marked
- Wooden crates for rollers and idlers
- Loose stow with bracing for chain assemblies
- 20 ft containers where payload governs the loading
| Range | Track chain assemblies, grouser shoes, sprockets, front idlers, top and bottom rollers, track adjusters and recoil springs |
|---|---|
| Machine classes | Mini machines through to the 90 t excavator class, and small to large dozer classes |
| Identification data | Link pitch, bushing outside diameter, link count, shoe width and grouser pattern, together with the machine serial number |
| Materials | Boron and alloy steel links with induction-hardened rail, typically 52–58 HRC at the surface over a tough core; greased and sealed-and-lubricated chain options |
| Shoe options | Single, double and triple grouser in 500–900 mm widths, plus rubber pads and road plates for surfaced work |
| HS Code | 8431.49 |
02
Ground Engaging Tools
Bucket teeth, adapters, side cutters, cutting edges and ripper shanks, matched to the tooth system and pin size on the machine rather than to a catalogue name.
Packaging
- Cartons of matched sets on pallets
- Steel-banded timber crates for cutting edges and shanks
- Individually bagged pins and retainers
| Range | Tooth points, adapters, pins and retainers, side cutters, end bits, cutting edges, ripper shanks and protectors |
|---|---|
| Fitment | Quoted by tooth system, adapter leg thickness and pin size; photographs of the existing adapter requested before quoting |
| Material | Forged or cast low-alloy steel, quenched and tempered; typical working hardness 48–52 HRC over a tough core |
| Profiles | General purpose, penetration, heavy-duty abrasion and rock chisel profiles |
| HS Code | 8431.49 |
03
Engine and Powertrain Parts
Cylinder heads, liner and piston kits, turbochargers, injectors and pumps, plus torque converters, transmissions, final drives and travel and swing motors.
Packaging
- Original manufacturer cartons where OEM or OES
- Foam-lined cartons for injectors, sensors and precision parts
- Timber crates on skids for heads, converters and final drives
| Engine group | Cylinder heads and gasket sets, liner-piston-ring kits, bearings and thrust washers, turbochargers, water and oil pumps, injectors and injection pumps, thermostats and cooling packs |
|---|---|
| Powertrain group | Torque converters, transmission and clutch parts, differentials, final drives, travel and swing motors and reduction gears |
| Identification data | Engine serial and arrangement number, machine serial or PIN, and OEM part number; emissions tier affects interchangeability and is confirmed before quoting |
| Sourcing category | Genuine OEM, OES from the original component maker, or quality aftermarket — stated per line with its warranty term |
| HS Code | 8409.99 (compression-ignition engine parts); 8431.49 (machine parts); 8483.40 (gearing and drives) |
04
Hydraulic Cylinders, Pumps, Motors and Valves
Complete cylinders and seal kits, main and gear pumps, travel and swing motors and control valves, quoted from bore, rod, stroke, pressure rating and displacement.
Packaging
- Cylinders crated on skids, rods retracted and ports blanked
- Pumps and motors drained, ports plugged, bagged and boxed
- Seal kits in labelled polythene sets by part number
| Cylinders | Boom, arm, bucket, blade and outrigger cylinders, quoted by bore, rod diameter, closed length, stroke and pin or eye geometry |
|---|---|
| Pressure rating | Typical working pressure 250–350 bar, with proof and burst margins to the original design |
| Pumps and motors | Axial piston main pumps with regulators, gear and vane pumps, travel and swing motors, quoted by displacement in cc/rev, rotation and port configuration |
| Valves | Main control valves, solenoid, relief and pilot valves, and centre swivel joints |
| Seals | Rod, piston and buffer seals, wear rings and dust seals in polyurethane, PTFE composite and NBR or HNBR, selected by temperature and fluid |
| HS Code | 8412.21 (hydraulic linear-acting cylinders); 8413.60 (rotary positive-displacement pumps); 8481.20 (valves for oleohydraulic transmission) |
05
Filters, Seals and Scheduled Service Kits
Filtration and sealing consumables assembled into kits at the machine's published service intervals, so a workshop receives one part number instead of twenty.
Packaging
- Individually boxed elements, cartoned by kit
- Single-part-number kit cartons with a packing list inside
- Shrink-wrapped pallets for stock replenishment orders
| Filtration range | Engine oil, fuel, water-separating fuel, hydraulic return and pilot, transmission, air primary and safety, and cabin filters |
|---|---|
| Performance data | Micron rating and efficiency to ISO 16889 for hydraulic elements, and ISO 4548-12 and ISO 19438 data for lube and fuel elements where the maker publishes it |
| Kits | 250, 500, 1,000 and 2,000 hour kits built to the machine's maintenance schedule, including the relevant O-rings, gaskets and crush washers |
| Sealing group | Floating and duo-cone seals, oil seals, O-rings and gasket sets, plus travel motor and final drive seal kits |
| HS Code | 8421.23 (oil and fuel filters for engines); 8421.31 (intake air filters); 8421.29 (other filtering); 8484.20 (mechanical seals) |
06
Bearings, Slew Rings and Electrical Components
Rotation and electrical parts: slewing rings and swing gearboxes, bearings, bushings and pins, alternators, starters, sensors, harnesses and monitor panels.
Packaging
- Slew rings on timber cradles, bolted and banded, faces protected
- Bearings in original sealed cartons with anti-corrosion wrap
- Electrical parts in anti-static or foam-lined cartons
| Slew group | Internal and external gear slewing rings, ball and roller types, with swing reduction gearboxes and pinions, quoted by outside diameter, bolt pattern and tooth data |
|---|---|
| Bearings and bushings | Tapered, spherical and cylindrical roller and deep-groove ball bearings to ISO dimension series, plus bronze and composite bushings and hardened pins |
| Electrical | 12 V and 24 V alternators and starter motors, solenoids, relays, switches, pressure and temperature sensors, wiring harnesses and monitor or display panels |
| Batteries | Lead-acid and AGM units are dangerous goods, UN 2794 when wet and filled with acid, and are declared and packed apart from general parts |
| HS Code | 8482 headings by bearing type; 8483.40 (gearing); 8511.40 and 8511.50 (starters and generators); 8536 (switches and connectors) |
07
Used and Surplus Complete Units
Inspected used and surplus machines and generating sets, offered with hours, serial number, a written condition report and photographic evidence rather than a grade letter.
Packaging
- Loose ship in 40 ft high cube where the unit fits internal dimensions
- Partially dismantled, with boom and bucket separated and crated
- Flat rack or open top with lashing to the carrier's securing requirements
- Roll-on/roll-off for self-propelled units
- Breakbulk on charter for oversize units
| Categories | Excavators, wheel loaders, dozers, backhoes, telehandlers and forklifts, mobile crushers and screens, and diesel generating sets |
|---|---|
| Data provided | Model and variant, serial or PIN, year of manufacture, indicated hours, engine and hydraulic condition notes and undercarriage or tyre wear percentage |
| Inspection | Pre-shipment inspection by an independent surveyor arranged on request, with cold start, function test and fluid sampling where the seller permits |
| Compliance | Emissions tier and machine standard checked against the destination's import rules, including the age limits several markets apply to used machinery |
| Preparation | Steam cleaning and biosecurity washdown arranged where the destination requires it; fluids drained or secured for shipment as agreed |
| HS Code | 8429 and 8427 headings by machine type; 8502.13 for generating sets above 375 kVA |
Trade terms
How this division ships, and what travels with the cargo
Packaging & stowage
- Heavy machined parts are bolted or banded to timber skids with the centre of gravity marked, so the receiving workshop can lift them without improvising.
- Unpainted and machined surfaces are coated or VCI-wrapped with desiccant; cylinders ship with rods retracted and ports plugged.
- Hydraulic components are drained, blanked and bagged before crating, to keep contamination out of the circuit on installation.
- Batteries, aerosols, paints, adhesives, oils and greases are removed from mixed parts orders and declared as dangerous goods under IMDG or IATA rules.
- Crates and pallets use ISPM 15 heat-treated and marked timber, and every package is marked with the order number, line number and part number so goods-in can reconcile against the packing list.
Delivery terms
- EXW — collection at the supplying warehouse, where the buyer uses a consolidator or forwarder in the country of supply.
- FCA — handover cleared for export at a named airport, terminal or forwarder's warehouse.
- CPT and CIP — air and multimodal shipments of urgent parts; under Incoterms 2020, CIP carries Institute Cargo Clauses (A) cover as the default.
- FOB and CFR — containerised volume orders and complete units.
- DAP — delivered to the site or workshop, with import clearance and duties for the buyer's account.
- DDP — offered case by case, and only where import clearance in the buyer's country is genuinely available to us.
Documentation
- Commercial invoice showing part number, quantity, unit price, country of origin and HS code per line
- Packing list with case marks, dimensions and net and gross weight per package
- Air waybill or bill of lading, with lashing and stowage details for complete machines
- Certificate of origin, attested where the destination requires it
- Manufacturer's or supplier's declaration and warranty statement, stating whether each line is OEM, OES or aftermarket
- Safety data sheets and a dangerous goods declaration for any oils, greases, batteries, aerosols or chemicals in the consignment
- For used units: written condition and inspection report, photographic record, ownership or de-registration documents and a cleaning or biosecurity certificate where required
- Pre-shipment inspection or conformity certificate where the destination operates a mandatory scheme
Producers & suppliers
Selling into this division
Dismantlers, surplus stockholders and remanufacturers are welcome to send stock lists with part numbers, condition and photographs. Aftermarket manufacturers should include material specification, test data and warranty terms.
Next step
Tell us the specification. We will come back with origins, terms and a price.
Send the grade, quantity, destination port and delivery window. If a line sits outside what we carry, we will say so rather than substitute it.
Replies within one business day